亚洲精品无人区_日韩av无码国产精品_成人无码av一区二区_国产免费久久精品99久久_伊人久久综合精品无码av专区

  • SALES CALLS:+8615504341996
  • AFTER THE PHONE:+8618643001113

Ten kinds of materials commonly used for heat exchange and their applicable conditions

2021-05-12 hits: column:NEWS CENTER

① Type 304 stainless steel

This is the cheapest and most widely used austenitic stainless steel (such as food, chemical, atomic energy and other industrial equipment). Suitable for general organic and inorganic media. For example, nitric acid with concentration < 30% and temperature ≤100℃ or concentration ≥ 30% and temperature < 50℃; Carbonic acid, ammonia water and alcohols with various concentrations at temperature ≤100℃. Poor corrosion resistance in sulfuric acid and hydrochloric acid; It is especially sensitive to crevice corrosion caused by chlorine-containing media (such as cooling water).

② 304L stainless steel

Corrosion resistance and application are basically the same as those of Type 304. Because the carbon content is lower (≤ 0.03%), the corrosion resistance (especially intergranular corrosion resistance, including weld zone) and weldability are better, and it can be used for semi-welded or all-welded PHE.

③ Type 316 stainless steel

Suitable for general organic and inorganic media. For example, natural cooling water, cooling tower water and demineralized water; Carbonic acid; Acetic acid and caustic lye with concentration < 50%; And solvents such as alcohols and acetone; Diluted nitric acid with temperature ≤100℃ (concentration < 20% =, diluted phosphoric acid (concentration < 30% =, etc.). However, it is not suitable for sulfuric acid. Because it contains about 2% Mo, its corrosion resistance in seawater and other chlorine-containing media is better than that of Type 304, and it can completely replace Type 304, as shown in Table 1-34. Is pre25.

④ 316L stainless steel

Corrosion resistance and application are basically the same as those of Type 316. Because the carbon content is lower (≤ 0.03%), the weldability and corrosion resistance after welding are also better, and it can be used for semi-welded or all-welded PHE. Is pre25.

⑤ Type 317 stainless steel

It is suitable for working conditions that require a longer service life than model 316. Because the content of Cr, Mo and Ni elements is slightly higher than that of type 316, it has better resistance to crevice corrosion, pitting corrosion and stress corrosion. PRE is 30.

⑥ AISI 904L or SUS890L stainless steel

This kind of austenitic stainless steel is cost-effective with consideration of both price and corrosion resistance. Its corrosion resistance is better than the above materials, and it is especially suitable for common acids and halides (including Cl-and F-) such as sulfuric acid and phosphoric acid. Because of the high content of Cr, Ni and Mo, it has good resistance to stress corrosion, pitting corrosion and crevice corrosion. PRE is 36.

⑦ Avesta 254 SMO high-grade stainless steel

This kind of ultra-low carbon high-grade stainless steel is improved by increasing Mo content. It has excellent chloride pitting corrosion resistance and crevice corrosion resistance, and is suitable for medium containing salt water, inorganic acid, etc. that can't be used in type 316. Is pre47.

⑧ Avesta 654 SMO high-grade stainless steel

It is an ultra-low carbon high-grade stainless steel with Cr, Ni, Mo and N contents higher than 254 SMO, which is resistant to

The corrosion performance of chloride is better than that of 254 SMO, and it can be used in cold seawater. Is pre64.

Pet-name ruby RS-2 (OCR20ni26mo3cu3si2nb) stainless steel

This is a domestic Cr–Ni–Mo–Cu stainless steel. The pitting corrosion resistance and crevice corrosion resistance are equivalent to Type 316, while the stress corrosion resistance is better. It can be used for concentrated sulfuric acid (concentration 90 ~ 98%) below 80℃ with annual corrosion rate ≤ 0.04 mm/a. Is pre29.

⑩ Incoloy 825

It is a Ni (40%)–Cr (22%)–Mo (3%) high-grade stainless steel. Incoloy is a registered trademark of theInternational Nickel Co, Ltd. Suitable for sulfuric acid with various concentrations at low temperature; In 50% ~ 70% caustic alkali (such as NaOH) solution, it has good corrosion resistance and does not produce stress corrosion cracking. However, it is sensitive to crevice corrosion caused by chloride. In addition, the stamping performance is not very good, so it is not a common material for sheet metal. PRE is 32.


Sales calls: +8615504341996
After-sales telephone: +8618643001113
Address:Room 101, Floor 1, West Side of North Xinhua Street, Sanhe Village, Pingxi Town, Tiexi District, Siping City, Jilin Province
Landline:+86 0434-3630077
Fax:+86 0434-7780077
COPYRIGHT ? SPCDHR.COM Siping Chengda Heat Exchange Equipment Manufacturing Co., Ltd All rights reserved 吉ICP備17004051號(hào)-1 Technical support:中諾科技
LINK
COPYRIGHT ? SPCDHR.COM Siping Chengda Heat Exchange Equipment Manufacturing Co., Ltd All rights reserved 吉ICP備17004051號(hào)-1 Technical support:中諾科技
日本边添边摸边做边爱| 成人午夜福利视频后入| 色综合久久中文综合网| 国产成人av区一区二区三| 波多野结衣不打码视频| 女的被弄到高潮娇喘喷水视频| 野花社区视频在线观看| 亚洲精品一区二区| 国产l精品国产亚洲区久久| 久久亚洲精品无码aⅴ大香| 国产精品av免费观看| 国产精品爱久久久久久久电影蜜臀| 国产精品白浆无码流出| 国产69精品久久久久999小说| 一本久道综合色婷婷五月| 人人妻人人爽人人做夜欢视频| 国产av无码国产av毛片| 亚洲熟女乱色综合亚洲小说| 国产精品99久久免费黑人人妻| 亚洲av乱码一区二区三区香蕉| 日韩亚洲av人人夜夜澡人人爽| 激情五月色综合国产精品| 美丽人妻被按摩中出中文字幕| 国产精品久久久久久久久人妻| 雯雯在工地被灌满精在线视频播放| 亚洲夜色噜噜av在线观看| 人体内射精一区二区三区| 成人久久免费网站| 国产精品久久久久久久久久直播| 亚洲国产一二三精品无码| 色诱视频在线观看| 亚洲av婷婷五月产av中文| 国产帅男男gay网站视频| 中国真实偷乱视频| 蜜臀av性久久久久蜜臀aⅴ| 亚洲 欧美 日韩 综合aⅴ视频| 亚洲精品无码午夜福利中文字幕| 亚洲av无码一区二区三区电影| 国产精品久久无码一区二区三区网| 亚洲色图片区| 中文字幕久久久人妻无码|